Now, with the more and more frequent use of electric furnace dust remover, no matter how good the maintenance is, more or less problems will occur, so why do these problems occur

The exhaust gas may contain acid and alkali components. If these concentrations change, the dew point will change. If theelectric furnace dust collectoris lower than the dew point when it is used, it will directly cause the filter bag to lose its previous strength and affect the effect of dust removal. The solution is to select the acid and alkali resistant filter bag when selecting the filter bag, so that the temperature of the electric furnace dust collector is not lower than the dew point, then the electric furnace dust collector needs to be well insulated. In addition, the filter bag will be blocked because the condensation water will combine with the floating ash on the surface of the filter bag and agglomerate after drying. If this happens, the filter bag needs to be purged and cleaned several times, which will not cause any damage to the filter bag

What faults will happen to the electric furnace dust collector when it is used

1. If the dust at the outlet of theelectric furnace dust collectorexceeds the standard, it will emit black smoke, which does not meet the requirements of environmental protection and is also a waste to the environment

2. If the filter bag catches fire, it will seriously affect the operation of the boiler dust collector

3. The output of the pulverizing system is reduced and the power consumption of the pulverizing system is increased due to the limited exhaust gas flow of theelectric furnace dust remover, which cannot reach the rated value< br/>